More power without a new power plant: DCS Cleantech brings BPOWER ORC units to Finland, Sweden and the Baltics
ORC turns existing waste heat into electricity – real ORC expander on show at Energia 2026, stand E404
Tampere, 19 October 2026
Gas engines, boilers and industrial processes already produce heat that is simply cooled into the air. An ORC (Organic Rankine Cycle) unit connects to this existing energy flow and turns it into electricity, with no extra fuel, no new combustion and no new power plant to build. DCS Cleantech Oy is the distributor of ORC equipment from BPOWER a.s., part of the BITZER Group, in Finland, Sweden, Estonia, Latvia and Lithuania.
Because ORC uses the existing plant, heat source and usually the existing grid connection, the extra electricity comes online quickly. Typical delivery is 2–4 months and commissioning takes 2–4 weeks. Cooling demand also drops, because the ORC takes over part of the dry cooler’s work.
In a BPOWER reference, a 1.5 MW biogas engine yields about 35 kWe from jacket water and about 120 kWe from exhaust gas. That is around 10 % more electricity from the same fuel.
The range covers ElectraTherm Power+ units for 65–150 °C hot water, up to 375 kWe per unit, and the Triogen e-box for 350–530 °C exhaust gas, 50–180 kWe net. BPOWER has installed more than 300 ORC systems worldwide.
“Extra electricity is usually sought from new power plants and grid investments, while many sites already blow heat into the air that could become on-site power. ORC is a fast way to add electricity output from existing energy flows without building new infrastructure. Alongside BPOWER’s technology we provide local project delivery and service,” says Tapani Stipa, Managing Director of DCS Cleantech.
“The Nordic and Baltic markets have many biogas engines and biomass boilers whose heat is an excellent fit for ORC. The ORC is installed alongside the existing engine or boiler, and in DCS we have a local partner with decades of experience in flue gas and heat recovery equipment,” says Josef Géba, Sales Director at BPOWER.
The stand also features Emission Partner SCR systems for NOx reduction on gas engines and LUEHR FILTER bag filters.
For media: ORC demonstration on Wed 21 October at 11:00, stand E404 (Hall E), with Josef Géba (BPOWER) and Tapani Stipa (DCS Cleantech).
DCS Cleantech Oy has designed, supplied and serviced industrial fans and emission control and energy solutions since 1983. It holds an ISO 9001 quality system and ISO 3834-2 welding certification. www.dcs.fi
BPOWER a.s. (Havlíčkův Brod, Czech Republic) is part of the German BITZER Group and specialises in ORC systems under the ElectraTherm and Triogen brands.
Contact: Tapani Stipa, Managing Director, DCS Cleantech Oy, +358 44 730 8102, tapani.stipa@dcs.fi